DIY bracelet scrap fabric

I made this bracelet with three long pieces of scrap fabric. The pieces are about 1 inch wide and 30 inches long. I used a ribbon clamp to secure the fabric, then I braided the fabric and after every 3 or 4 inches I attached a charm. At the end there is a nother ribbon clamp. To fasten the ends I used a piece of chain and a clasp.

I made a box out of wall paper scraps. See link for instructions;

2 opmerkingen:

  1. Ook dit heb je weer erg leuk gedaan Marly !!
    Ben trots op je, mooi gedaan !


Related Posts Plugin for WordPress, Blogger...